JTC-JL9511 Dismantle Tool For Shock Absorbers
Special design to use for most cars.
First, check the spring angle and choose the A, B, C clamp.
Assemble clamp on "a" and "b" fasten holder.
Then turn "c" turning wheel of "a" fastener holder, adjust to the proper position and then put adjust clamp on shock absorber to completely press spring will do.
To lock tightly "d" hydraulic valve and shake up and down for "e" hydraulic operating rod. Then hydraulic spring will move "b" clamp to fasten seat up to your proper height position. And then you can disassemble the shock absorber.
After dismantling and changing the shock absorber, to release slowly "d", and then "b" will lower to original position.
Contents:Clamp A.B.C
1. Outstanding Features
Special design to use for most cars. First, check the spring angle and choose the A, B, C clamp. Assemble clamp on "a" and "b" fasten holder. Then turn "c" turning wheel of "a" fastener holder, adjust to the proper position and then put adjust clamp on shock absorber to completely press spring will do. To lock tightly "d" hydraulic valve and shake up and down for "e" hydraulic operating rod. Then hydraulic spring will move "b" clamp to fasten seat up to your proper height position. And then you can disassemble the shock absorber. After dismantling and changing the shock absorber, to release slowly "d", and then "b" will lower to original position. Contents Clamp A.B.C.
2. Practical Applications
Removing and installing shock absorber springs on most cars. Using A, B, C clamps suitable for the spring angle. Compressing shock absorber springs using the hydraulic system. Supporting automotive repair technicians and mechanics. Used in garages, service workshops and automotive maintenance stations. Suitable for automotive technical training. Convenient for replacing shock absorbers without removing the entire suspension system. Used for many passenger cars and light trucks.
3. How to Use
Step 1: Check the spring angle and select the suitable A, B or C clamp type.
Step 2: Assemble clamp on "a" and "b" fasten holder.
Step 3: Turn "c" turning wheel of "a" fastener holder to fasten faster.
Step 4: Adjust to the proper position and put the clamp on the shock absorber spring.
Step 5: Lock tightly "d" hydraulic valve and shake up and down for "e" operating rod.
Step 6: The hydraulic ram moves "b" clamp to a higher position to completely compress the spring.
Step 7: Dismantle and install the shock absorber, then release slowly "d" and "b" to original position.
4. Device Maintenance
Clean tool with soft damp cloth after each use. Do not immerse tool in water or strong solvents. Apply oil to screw threads and joints periodically for smooth operation. Check hydraulic system periodically for oil leaks. Check A, B, C clamps periodically for cracks or deformation. Store in dry place, avoid direct sunlight and high temperature. Do not use tool outside allowed load capacity. Store in carrying case when not in use.