JTC-6015 Ark Protector
Specially designed to prevent damage to electrical systems from voltage spikes during welding.
Suitable for 12V or 24V systems.
LED indicators: Green light – protection; Red light – reverse connection. With no protection, an safety alarm will sound.
Designed to be fitted across the battery terminals to absorb unwanted power surges.
Power cord: 38 cmL; 4 AWG.
1. Key Features
JTC-6015 Ark Protector is specially designed to protect vehicle electrical systems from damage caused by voltage spikes generated during welding operations.
It is suitable for both 12V and 24V electrical systems, making it compatible with various vehicles.
The unit features LED status indicators: green light indicates protection mode, while the red light indicates reverse connection.
When protection is not properly established, a safety alarm sounds to alert the operator to check the connection.
JTC-6015 is designed to be connected across the battery terminals to absorb unwanted power surges and help protect sensitive electrical components.
The unit is equipped with a 38 cm power cord using 4 AWG cable, providing a robust connection for automotive service applications.
2. Practical Applications
JTC-6015 is used to protect vehicle electrical systems and electronic components during welding operations.
It helps reduce the impact of unwanted voltage spikes and electrical surges that may travel through the vehicle's electrical system.
Suitable for automotive repair shops, body repair workshops, collision repair centers, and service facilities performing welding work on vehicles.
It can be used with vehicles equipped with 12V or 24V electrical systems.
3. How to Use
Turn off the vehicle electrical system and make sure the welding equipment is not powered before installation.
Identify the correct positive (+) and negative (-) battery terminals.
Connect JTC-6015 across the battery terminals according to the correct polarity.
Check the LED indicators: green light indicates protection, while red light indicates reverse connection and requires the polarity to be checked.
If the unit sounds an alarm, stop the operation and inspect the connection.
After confirming correct operation, proceed with welding according to the workshop's safety procedures.
4. Equipment Maintenance
Inspect the power cord, connectors, and housing before each use.
Keep the electrical contact points clean, dry, and free from oxidation.
Periodically check the LED indicators and alarm function to ensure proper operation.
Do not use the device if the cable is cracked, burned, broken, or if the connectors are damaged.
Store JTC-6015 in a dry location away from excessive heat, water, and corrosive chemicals.
